[ Log In ]
[ Register ]
small aluminum heat sink and a packet of thermal compound The bottom side of the small aluminum heat sink with a packet of thermal compound Measurement of the width of the heat sink at 0.448 inches (11.3797 mm) Measurement of the depth of the heat sink at 0.4345 inches (11.0363) Measurement of the height of the heat sink at 0.2 inches (5.08 mm)
small aluminum heat sink and a packet of thermal compound The bottom side of the small aluminum heat sink with a packet of thermal compound Measurement of the width of the heat sink at 0.448 inches (11.3797 mm) Measurement of the depth of the heat sink at 0.4345 inches (11.0363) Measurement of the height of the heat sink at 0.2 inches (5.08 mm)
Price Options Your Cart
Heat Sink
$0.79

Includes free technical support.Learn More
Thermal Compound (single packet)
$0.79

Includes free technical support.Learn More
Heat sink with a packet of thermal compound
$1.50

Includes free technical support.Learn More
Introduction:

Are your chips or voltage regulators getting too hot? Consider these small heat sinks to remove all that thermal energy!

Description:

These small aluminum heat sinks are used to draw heat away from a components that produces heat. The shape of the heat sink maximizes the heat dissipation in two ways. First, the aluminum has a high thermal conductive property, so it will absorb the heat very quickly and then the heat will radiate off of the heat sink because the shape contains a lot of surface area. Add convection (moving air) and the heat (thermal energy) will be remove more quickly.

Dimensions of the heat sink: 0.448 inches (11.3797 mm) x .4345 inches (11.0363) x 0.2 inches (5.08 mm)

Thermal compound is also available. in the price options.

The thermal compound is used to stick the heat sink to the electrical component and the thermal compound also has a high thermal energy conductivity.

Ask a question about the Small Aluminum Heat Sink and Thermal Compound:
Previously answered questions:

Click on the question to reveal the answer.
No previous questions. Be the first to ask a question about this product.
----
Related Tutorials
Step 29: Heat Sink and Driver Connections
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. Yes, we've used heat shrink, but now it's time for a heat sink. No, it's not a hot tub. A heat sink is usually a piece of metal that allows something that gets hot to dissipate the heat. It is advised for the three driver chips on the HobbyCNC board. The installation is straight forward. Holes are marked and then drilled. It is important to note that the drill will create many metal shavings. Metal shavings are incompatible to the proper functioning of the driver board. If any of those shavings get on the board, you will risk a blown chip. Before final installation of the heat sink, a white compound should be spread between the component and the metal, like a peanut butter sandwich.
Step 23: Driver Part 4
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The driver is almost to a completion! We have installed all of the tiny components. Now to the big components. This is the logical process of putting together any circuit kit. The small components are difficult to insert if the larger components are installed already. Believe me, I've tried. Especially if there are jumper wires or resistors needed underneath chips and sockets.
Closeup allegro 3979 3 axis stepper motor driver board 3 and 4 Axis Stepper Motor Driver Board Based on the Allegro Chip
So, what exactly is a 3 and 4 axis stepping motor driver board. Actually, I am presenting the 3 axis stepping motor driver board in this article, but there is another much smaller board that will connect to this one that will provide an additional driver, making it useful for those wonderful 3D projects that use an indexer.
----
Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.